Reef Explorers

Drift diving basics: how current dives work

How drift dives work: negative entries, surface marker buoys, staying with your group and buddy, signalling devices and the training usually expected.

On a drift dive you let the current carry you along the site, often with a dive flag at the surface that the boat can follow. DAN describes it as an extremely relaxing way to dive, but it depends on staying with your group and having a way to be seen when you come up.1,2

How a drift dive works

DAN describes drift diving, going with the flow, as an extremely relaxing way to dive. Instead of swimming against the water, the group moves with it. Often a dive flag floats on the surface, tethered to a diver below, so the boat captain can follow the group's progress underwater.1

Because the water is moving, there is no fixed point to return to. DAN notes that in a current, in the time it takes to let go of a descent line and clear your mask, you can already be out of reach of the line.2

Negative entries

Depending on the current, DAN notes that you might have to make a negative entry: entering the water with little or no air in your buoyancy compensator and continuing to descend straight away. Because the current moves you as soon as you are in, there is little time to sort out equipment at the surface or on a line.2

Staying with the group

DAN's advice is to stay with your group or, at a minimum, with a buddy. If you and your buddy become separated from the group, stay together. A first-hand account published by DAN shows why: a diver who surfaced away from the boat shouted but was not heard, then heard the boat go into gear to follow other divers' bubbles.2,3

Surface marker buoys and signalling

DAN recommends bringing a surface marker buoy (SMB) and a reel at an absolute minimum on current dives. Once deployed, the SMB lets the dive operator see where you are and lets the crew follow your position during your safety stop. Safety sausages and similar devices can also serve as a surface signal when the group is not using a dive flag.1,2

Many divers also carry a signalling mirror and a whistle in case they become separated from their buddy or the boat. In the same DAN account, the diver's team did not see him even after he deployed a second SMB, a reminder that one device may not be enough at a distance.2,3

What level is usually required

DAN advises that divers should not dive in currents stronger than 1 knot without proper training and experience, and recommends getting training in the skills needed before jumping into the current. As an example of a published standard, SSI's Waves, Tides and Currents programme, which covers diving in currents, lists a minimum age of 10 and Open Water Diver certification as the prerequisite.1,2,4

Before you go

  • Know the entry type and the pick-up plan before you get in.1,2
  • Carry an SMB and reel, and know how to deploy them.1,2
  • Add a whistle and signalling mirror.2
  • Agree with your buddy to stay together if you lose the group.2
  • Be honest about your experience in currents stronger than 1 knot.2

Sources

  1. 1. dan.org
  2. 2. dan.org
  3. 3. dan.org
  4. 4. divessi.com

Sources checked on 10 November 2026. Written from these pages and checked by an independent second reader.

Where to dive next month

One email a month, around the 25th: the destinations in season the following month, with their sources, an article to read and an instructor's tip. Free, no ads.

Your address is only used to send this newsletter, through MailerLite. Every email has an unsubscribe link. Your data and your rights